[
点击图片查看原图
德国aircom详细说明
描述:
Piston-operated pressure regulator completely made of stainless steel up to pressure range of 52 bar,
independent of inlet pressure.
Note:
It is recommended to select an outlet diameter at least one time larger than the main valve's diameter.
Media: compressed air, gases, liquids or steam (R70-01/-02 not suitable for steam)
Supply_pressure:
max. 16 bar at R70-01/-02,
max. 40 bar at R70-16/-20,
max. 63 bar at R70-03/-06 to -12,
max. 100 bar at R70-04
Adjustment:
by wing screw at R70-01 and -02, with locknut
by T-handle at R70-03 to -20, with locknut
Relieving_function: non-relieving
Gauge_port: G1/4 on both sides of the body
Mounting_position: any
Temperature_range:
0 °C to 140 °C / 32 °F to 284 °F, EPDM, steamable
0 °C to 150 °C / 32 °F to 302 °F, PTFE/EPDM, for steam
0 °C to 200 °C / 32 °F to 302 °F, PTFE/AF100/EPDM, for steam
Body: stainless steel 1.4301 or 1.4571 (R70-01/-02), optionally 1.4435
Spring_cage: stainless steel 1.4301
Diaphragms: EPDM
Seals: EPDM, optionally PTFE
O-rings: EPDM
Pharmacy and food-safe version:
Description:
The pharmacy version (option P) standard design is completely made of stainless steel, independent
of inlet pressure, sealed at zero consumption, with EPDM and steamable to 140 °C / 284 °F.
Media contact parts have roughness of Ra < 2.6 µm.
Special_options:
Add the appropriate letter to the order number
Outer_surface:
Valve body: electropolished FA, glass bead shot-peened FC
Complete_valve: electropolishedFB, glass bead shot-peened FD, ground/polished Ra 1.2 µm FE
Inner_surface:
Valve_body: Ra < 2.0 µmglass bead shot-peened GA
Media_contact_parts: Ra < 1.6 µm GB, Ra < 0.8 µm GC, Ra < 0.5 µm GD
Connection:
Aseptic flange as per DIN 11864-2 F(AS)as per APV F(APV)
Flange as per DIN 2633 (PN 16) F, as per ANSI B16.5 150 lbs F150lbs
Threaded connection as per DIN 11851 GA
Clamp fittings as per DIN 32676 CL
德国aircom型号大全
AIRCOM R037
AIRCOM RD4
RH10-A3B 1/2" 10000l/m1-15bar（7）减压阀
AirCom Repairkit for RH3-04D
特价供应 AirCom 调压阀 RH3-04D
AirCom 10124HN
MHA-A2P风压仪
R10-04C流量计
AirCom AIC-FM-03_02
AirCom MA6302-02
B3000-04_01压力调节阀
MHA-A2P风压表
R280-08EG G1`` 0.5-25bar流量计
AirCom PRA32-0600
AIRCOM R307
R120-04F压力调节器
特价供应 AirCom 调压阀 PQ1EE-16+PRK-A2L
AIRCOM PP700/VP700
RGDJ-08HM阀门
MHA-A5P压力表
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
Piston-operated pressure regulator completely made of stainless steel up to pressure range of 52 bar,
independent of inlet pressure.
Note:
It is recommended to select an outlet diameter at least one time larger than the main valve's diameter.
Media: compressed air, gases, liquids or steam (R70-01/-02 not suitable for steam)
Supply_pressure:
max. 16 bar at R70-01/-02,
max. 40 bar at R70-16/-20,
max. 63 bar at R70-03/-06 to -12,
max. 100 bar at R70-04
Adjustment:
by wing screw at R70-01 and -02, with locknut
by T-handle at R70-03 to -20, with locknut
Relieving_function: non-relieving
Gauge_port: G1/4 on both sides of the body
Mounting_position: any
Temperature_range:
0 °C to 140 °C / 32 °F to 284 °F, EPDM, steamable
0 °C to 150 °C / 32 °F to 302 °F, PTFE/EPDM, for steam
0 °C to 200 °C / 32 °F to 302 °F, PTFE/AF100/EPDM, for steam
Body: stainless steel 1.4301 or 1.4571 (R70-01/-02), optionally 1.4435
Spring_cage: stainless steel 1.4301
Diaphragms: EPDM
Seals: EPDM, optionally PTFE
O-rings: EPDM
Pharmacy and food-safe version:
Description:
The pharmacy version (option P) standard design is completely made of stainless steel, independent
of inlet pressure, sealed at zero consumption, with EPDM and steamable to 140 °C / 284 °F.
Media contact parts have roughness of Ra < 2.6 µm.
Special_options:
Add the appropriate letter to the order number
Outer_surface:
Valve body: electropolished FA, glass bead shot-peened FC
Complete_valve: electropolishedFB, glass bead shot-peened FD, ground/polished Ra 1.2 µm FE
Inner_surface:
Valve_body: Ra < 2.0 µmglass bead shot-peened GA
Media_contact_parts: Ra < 1.6 µm GB, Ra < 0.8 µm GC, Ra < 0.5 µm GD
Connection:
Aseptic flange as per DIN 11864-2 F(AS)as per APV F(APV)
Flange as per DIN 2633 (PN 16) F, as per ANSI B16.5 150 lbs F150lbs
Threaded connection as per DIN 11851 GA
Clamp fittings as per DIN 32676 CL
德国aircom型号大全
AIRCOM R037
AIRCOM RD4
RH10-A3B 1/2" 10000l/m1-15bar（7）减压阀
AirCom Repairkit for RH3-04D
特价供应 AirCom 调压阀 RH3-04D
AirCom 10124HN
MHA-A2P风压仪
R10-04C流量计
AirCom AIC-FM-03_02
AirCom MA6302-02
B3000-04_01压力调节阀
MHA-A2P风压表
R280-08EG G1`` 0.5-25bar流量计
AirCom PRA32-0600
AIRCOM R307
R120-04F压力调节器
特价供应 AirCom 调压阀 PQ1EE-16+PRK-A2L
AIRCOM PP700/VP700
RGDJ-08HM阀门
MHA-A5P压力表
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。