[
点击图片查看原图
德国aircom详细说明
描述:
All-purpose, high-performance, compact diaphragm regulator with high flow. Due to the external
feedback regulation is significantly improved and the flow rate increased.
Media: compressed air
Supply_pressure: max. 21 bar
Air_consumption: approx. 2 l/min
Adjustment:
R10 - by plastic knob with snap-lock,
R11 - by T-handle with locknut
External_feedback:
should be installed on that point where pressure stability is desired, e.g. at least 50 cm
after the outlet or in the case of a combination with a volume booster at the booster outlet.
Relieving_function: relieving
Gauge_port: not available
Mounting_position: any
Temperature_range:
R10-R = 0 °C to 50 °C / 32 °F to 122 °F
R11-R = 0 °C to 70 °C / 32 °F to 158 °F,
for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: zinc die-cast
Spring_cage: glass fibre-reinforced plastic at R10, zinc die-cast at R11
Elastomer: NBR/Buna-N, optionally FKM
Inner_valve: brass, optionally stainless steel
德国aircom型号大全
D4V-C3流量计
AirCom F400
R901-6M阀芯
R280-08D减压阀
特价供应 AirCom 调压阀 R13-02EV
AirCom 过滤器 F465-06EL
AirCom PRE1-I08
RO3-04J6 G1/2减压阀
R13-02EV减压阀
特价供应 AirCom 调压阀 RH3-04D
AirCom 调节阀 R160-04B
R160-08B13_01减压阀
AIRCOM V900
AirCom 调压阀 R400-04C
R03-04D压力调节器（减压阀）
AIRCOM RL13
AirCom 减压阀 R280-08EG G1 0.5-25bar
特价供应 AirCom 调压阀 R120-02G
R280-04CG G1/2`` 0.5-10bar流量计
AIRCOM R3000
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。
描述:
All-purpose, high-performance, compact diaphragm regulator with high flow. Due to the external
feedback regulation is significantly improved and the flow rate increased.
Media: compressed air
Supply_pressure: max. 21 bar
Air_consumption: approx. 2 l/min
Adjustment:
R10 - by plastic knob with snap-lock,
R11 - by T-handle with locknut
External_feedback:
should be installed on that point where pressure stability is desired, e.g. at least 50 cm
after the outlet or in the case of a combination with a volume booster at the booster outlet.
Relieving_function: relieving
Gauge_port: not available
Mounting_position: any
Temperature_range:
R10-R = 0 °C to 50 °C / 32 °F to 122 °F
R11-R = 0 °C to 70 °C / 32 °F to 158 °F,
for appropriately conditioned compressed air down to -30 °C / -22 °F
Body: zinc die-cast
Spring_cage: glass fibre-reinforced plastic at R10, zinc die-cast at R11
Elastomer: NBR/Buna-N, optionally FKM
Inner_valve: brass, optionally stainless steel
德国aircom型号大全
D4V-C3流量计
AirCom F400
R901-6M阀芯
R280-08D减压阀
特价供应 AirCom 调压阀 R13-02EV
AirCom 过滤器 F465-06EL
AirCom PRE1-I08
RO3-04J6 G1/2减压阀
R13-02EV减压阀
特价供应 AirCom 调压阀 RH3-04D
AirCom 调节阀 R160-04B
R160-08B13_01减压阀
AIRCOM V900
AirCom 调压阀 R400-04C
R03-04D压力调节器（减压阀）
AIRCOM RL13
AirCom 减压阀 R280-08EG G1 0.5-25bar
特价供应 AirCom 调压阀 R120-02G
R280-04CG G1/2`` 0.5-10bar流量计
AIRCOM R3000
德国aircom品牌介绍
德国AirCom公司压力变送器工作原理：当压力直接作用在测量膜片的表面，使膜片产生微小的形变，测量膜片上的高精度电路将这个微小的形变变换成为与压力成正比的高度线性、与激励电压也成正比的电压信号，然后采用专用芯片将这个电压信号转换为工业标准的4-2OmA电流信号或者1-5V电压信号。由于测量膜片采用标准话集成电路，内部包含线性及温度补偿电路，所以可以做到高精度和高稳定性，变送电路采用专用的两线制芯片，可以保证输出两线制4-2OmA电流信号。德国AIRCOM压力变送器主要性能：1、使用被测介质广泛，可测油、水及与316不锈钢和304不锈钢兼容的糊状物，具有 定的防腐能力；2、高准确度、高稳定性、选用进口原装传感器，线性好，温度稳定性高；3、体积小、重量轻、安装、调试、使用方便；4、不锈钢全封闭外壳，防水好；5、压力传感器直接感测被测液位压力，不受介质起泡、沉积的影响。